| Ambla |
AMBLA is a vinyl coated fabric incorporating an expanded vinyl inter-layer. It is suitable for general seating applications, including wheelchairs.
·full contact quality
·stretch in warp and weft for excellent upholstery characteristics
·can be sewn and face welded
·can be vacuum formed according to process
·impermeable, washable surface
·meets international fire retardant norms
·immediately available in more than 60 colours and designs
AMBLA - TECHNICAL DATA
Thickness: 1.3mm
Width: 137cm
Weight: 830gsm
Fabric: 110 gsm (100% knitted cotton)
Coating: 720gsm
(Wild Heather products are slightly lighter weight: 1.1mm thick, 740gsm overall)
AMBLA products meet the performance characteristics of BS5790 Part 1 Type 2 Grade X
Burst Strength (min): 690 K/Pa
Coating adhesion: 26N
Elongation - warp (min): 10%
weft (min): 40%
Flex cracking cycles: 400,000
Printwear: BS5790/BS3424
Abrasion: 700 cycles BS3424
Colour fastness to light: Grey scale 5
AMBLA has been tested by the independent CTBA in France and is approved as a seating component by German Railways.
AMBLA - FIRE RETARDANCY
UK: BS 5852 Part 1, Sources 0 and 1
Part 2, Source 5
BS 7176 medium hazard predictive test. |
| Just Colour Vinyl |
Expanded, flame retardant, plasticised PVC coating on a knitted cotton base cloth.
NOMINAL PHYSICAL PROPERTIES:
Total Weight: 705g/m2
Base Fabric Weight: 120g/m2
Coating Weight: 685g/m2
Thickness: 1.10mm
Bursting Strength: 800kN/m2
FLAME RETARDANCY
BS 5852 Ignition Source 5 (Tested in conjunction with a 35kg/m2 CMHR foam)
FMVSS302
CAA Spec 8
BS7176 – Medium Hazard
IMO Resolution A.562(16)
PHYSICAL CHARACTERISTICS
Printwear: >3 (Grey Scale)
Martindale Abrasion: 100,000 rubs
Roll Length: 25m (nominal)
Roll Width: 137cm (nominal) |
| Neoprene |
Neoprene Sponge Rubbers.
Sponge Rubbers are the foremost materials that are used for seals and gaskets for preventing leeks of gasses or fluids at low compression forces.
Properties Include:-
Softness
Elasticity
Very low compression set
Sealing
Sound and thermal insulation
Shock absorbents
Anti – vibration
Fire – resistant
Electrically conductive
Neoprene is the term given to Polychloroprene.
In the foamed format, it has an excellent characteristic for creating a seal or gasket upon the application of a small amount of compression. Uses include: Oil Seals Weatherstripping Vent and Air Conditioning Seals.
Good Heat Resistance -20 to +100◦c
Moderate chemical and oil resistance
Good sea water, acids/alkalis, fats and grease, oil/fuel resistance
Good Ozone and UV resistance
Excellent Fire Retardant capabilities. FMVSS302, UL94 HF1, V0
The foams can be supplied with or without self adhesive backing and can be cut into coils for sealing tapes. |
;)
;)
;)
;)
;)
;)
;)
;)
