Description S 1358 is a multi purpose contact adhesive based on polychloroprene, giving high heat resistance

Application
Alpha S1358 forms strong, permanent contact bonds with excellent heat resistance between the following materials - rigid PVC sheet, polyurethane foams of the polyester and polyether types, good quality supported PVC leather cloth, leather, polyester glass fibre, rubber sheet and extrusions, painted or unpainted metal. Rigid laminated plastics, such as Formica, Ware rite, Melamine, etc may also be fixed with this adhesive.

Technical Data
Total Solids:                    28 ± 2 %
Viscosity (at make):        5500-6500 cps
Typical Specific Gravity: 0.88
Flash Point:                    -5°C
Coverage:                       3-4 square metres of bonded material/ litre
Open Joint:                     7 minutes - minimum 20 minutes - maximum
Heat Resistance:            100°C
Cleaner:                          T559

1 Litre Tins.

Price per Tin.

Directions For Use

Applying can be tricky but can be solved with the Glue Master Glue Gun.
The perfect applicator for this Adhesive.

1. Ensure materials are dry, clean and free from loose materials, grease and oil
2. Stir before use. Apply an even coat to both surfaces
3. Allow adhesive to dry until the coated surfaces can be lightly touched without adhesive transferring (7 - 20 mins)
4. Apply even pressure

1 Litre Tins.
Price per Tin.